Freight Class & Shipping Codes

ASBESTOS PAPER, MILLBOARD AND FELT

ShipNerd provides discounted shipping rates for shipping asbestos paper, millboard and felt.

When shipping asbestos paper, millboard and felt via small package couriers such as UPS or Canpar Express, or LTL providers, be sure to specify any necessary special handling.

Use the quick quote tool to see the best shipping rates for your shipment of Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials, Ceramic Products, Glass and Glassware.

Remember, package couriers only accept packages weighing up to 150lbs, and up to 165″ in length and girth combined. Shipments of Stone / Cement / Plaster on pallets, or over these size and weigh limits will ship via LTL Freight using ShipNerd.

LTL freight shipping of most stone, plaster, cement and ceramic products are assigned a relatively low freight class which translate to lower shipping rates.

HS: #681299

Harmonized System

The Harmonized System is a 6-digit coding standard for international classification of imported and exported products and commodities.

The HS number for asbestos paper, millboard and felt is #681299.

Schedule B: #6812991000

U.S. Export Commodity Classifications

United States export codes, more commonly known as “Schedule-B numbers” are based on the [international] Harmonized System and further classify the items you're shipping.

The Schedule-B number for “ASBESTOS PAPER, MILLBOARD AND FELT” is #6812991000 based on the classification below.

CodeDescription
Section XIII Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials, Ceramic Products, Glass and Glassware
Chapter 68 Articles of Stone, Plaster, Cement, Asbestos, Mica or Similar Materials
Heading 12 Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate; articles of such mixtures or of asbestos (for example, thread, woven fabric, clothing, headgear, footwear, gaskets), whether or not reinforc
Sub-Heading 99 Other
Statistical Classification 1000 ASBESTOS PAPER, MILLBOARD AND FELT

NOTE: Schedule-B takes the 6-digit HS code, (in this case, #681299), and appends a 4-digit “Statistical Classification”, (e.g.- “1000”) to it.

HTS: #6812.99.10.00

Harmonized Tariff Schedule

The Harmonized Tariff Schedule (HTS) lists the United States tariff rates for all classes of goods imported into the US.

HTS #6812.99.10.00
Category:Fabricated asbestos fibers; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate; articles of such mixtures or of asbestos (for example, thread, woven fabric, clothing, headgear, footwear, gaskets), whether or not reinforced, other than goods of heading 6811 or 6813:
2nd Level:Other
3rd Level:(not applicable)
Description:Paper, millboard and felt
Unit of Quantity:m2
General Rate of Duty:Free
Special Rate of Duty:
Column 2 Rate of Duty:25%
Quota Quantity:
Additional Duties:

HTS tariff/duty notes, trade agreements, restrictions and other information related to HTS# 6812.99.10.00 are available on the U.S. International Trade Commission website at: hts.usitc.gov

NMFC®

National Motor Freight Classification® (US)

For (US) interstate, intrastate or international LTL Freight shipments an NMFC® Freight Class is assigned primarily based on density, (lb. per cubic foot).

Our Quick Quote tool estimates freight class based on size and weight entered and displays a list of carriers, services and rates for pallets of LTL Freight or delivery of parcels, (envelopes, boxes, shipping tubes, etc).

Get a Quick Quote
  
Dimensions

Freight Class may be adjusted up or down depending on type of item shipped, handling requirements, how “stow-able” the cargo is and the liability, (potential for loss, high value, etc).

Rates are lower for lower freight classes, and higher for higher classes. Shipments requiring special handling may be assigned to a higher freight class. Products which are high-values, easily damaged, prone to loss, may damage other freight, or are perishable may be assigned a higher freight class. Products which are large, or irregularly shaped, or un-stackable such as assembled furniture, machines, etc may be assigned a higher freight class.

In general, there are (18) NMFC® Freight Classes ranging from Class 50 to Class 500:

CLASSWEIGHT PER CUBIC FOOTEXAMPLES (Most dense to least dense)
50Greater than 50lbsNuts, bolts, steel
5535 – 50 LBBricks, cement
6030 – 35 LBCeramic tiles, auto accessories
6522.5 – 30 LBBooks, bottled liquor
7015 – 22.5 LBFood items, boxed paper
77.513.5 – 15 LBTires, snowplows, bath fixtures
8512 – 13.5 LBPharmaceuticals, wood furniture
92.510.5 – 12 LBComputers, refrigerators
1009 – 10.5 LBCookware, letal, wine cases, rugs
1108 – 9 LBFramed artwork, pneumatic tires
1257 – 8 LBSmall household appliances
1506 – 7 LBRefrigerators, sheet metal, bookcases
1755 – 6 LBClothing, couches, stuffed furniture
2004 – 5 LBAluminum parts, box springs
2503 – 4 LBPlasma TVs, upholstered furniture
3002 – 3 LBModel cars, assembled chairs, tables
4001 – 2 LBLight fixtures, deer antlers
500<1 lb.Ping pong balls, gold dust

For more information on NMFC® Freight Classes, visit the National Motor Freight Association, (NMFTA), website at: nmfta.org.

END USE: #13110

Foreign Trade Division, U.S. Census Bureau

End-use commodity classification identifies merchandise based on principal use rather than the physical characteristics.

End Use Classification (Expanded)
CodeHeading
1Industrial supplies and materials
13Selected building materials, except metals
131Building materials, finished
13110Shingles, wallboard

The End Use code for Shingles, wallboard is #13110.

END USE may affect tariffs, duties, taxes, restrictions and other import/export considerations.

SITC: #66381

Standard International Trade Classification

SITC codes are used by the United Nations (UN) for classifying (international) import / export trade data.

SITC Classification (Expanded)
6MANUFACTURED GOODS CLASSIFIED CHIEFLY BY MATERIAL
66NONMETALLIC MINERAL MANUFACTURES, N.E.S.
663
6638
66381FABRICATED ASBESTOS AND ASBESTOS MIXTURES (INCLUDING THREAD, WOVEN FABRIC, CLOTHING, ETC.), N.E.S. (NOT ASBESTOS-CEMENT OR ASBESTOS FRICTION ARTICLES)

The SITC Classification for “FABRICATED ASBESTOS AND ASBESTOS MIXTURES (INCLUDING THREAD, WOVEN FABRIC, CLOTHING, ETC.), N.E.S. (NOT ASBESTOS-CEMENT OR ASBESTOS FRICTION ARTICLES)” is #66381.

NAICS: #327999

North American Industry Classification System

NAICS was developed by the U.S., Canada and Mexico to make business statistics comparable across North America.

NAICS Classification (Expanded)
32
327Nonmetallic Mineral Product Manufacturing
3279Other Nonmetallic Mineral Product Manufacturing
32799All Other Nonmetallic Mineral Product Manufacturing
327999All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

The coding NAICS #327999 indicates this is a product of the All Other Miscellaneous Nonmetallic Mineral Product Manufacturing industry.